Injectors
Printed From: GTIR Modifiers Club
Category: TECHNICAL
Forum Name: Performance Mods
Forum Discription: Any talk / questions on Tuning your R and gaining extra power
URL: http://www.nissangtir.co.uk/forum/forum_posts.asp?TID=10173
Printed Date: 08/September/2010 at 06:24
Topic: Injectors
Posted By: bopper
Subject: Injectors
Date Posted: 12/August/2006 at 08:14
|
I want to get some new injectors from the states im dealing with rc engineering and they just sent me this email can anyone answer the questions for me please
Hello Dean,
Your 1994 Nissan Pulsar injectors looks like it's a side-feed type injector. The injectors are similar to the Nissan Sentra type as well. We specialize in top-feed type injectors, so we may not have any injectors for your application. Is there any way you can send us a photo of your stock injector? That would be helpful. For the resistance, we tested them in Peak and Hold-Low resistance only, so if you have a volt meter, you can test to see the ohms. If the injector is between 2-3 ohms, you need a Peak and Hold-Low resistance injector. If your injector is between 12-16 ohms, you need an Saturated-high resistance injector. Here are the closest dealers near zipcode, 32830: |
Replies:
Posted By: GtiR-nick
Date Posted: 26/August/2006 at 14:41
| i thought the gtir injectors are top feed???? s13 s14 s15 are side feed??? |
Posted By: Andy C
Date Posted: 29/August/2006 at 15:10
|
GTiR injectors are top fed and low impedance. ------------- http://www.octanejunkies.com - http://www.octanejunkies.com 2001 Evo VI GSR, Autronic ECU, 6 pot AP's, Exedy twin plate, Cusco coilovers, HKS exhaust, 380hp! |
Posted By: 1of2
Date Posted: 29/August/2006 at 23:09
Originally posted by GtiR-nicki thought the gtir injectors are top feed???? s13 s14 s15 are side feed??? i know the s body cars all have top feed injectors.
as said above. ours are top feed low impedance ------------- RIP Colin McRae. http://www.sloganizer.net/en/"> 
|
Posted By: The Bear
Date Posted: 30/August/2006 at 00:28
|
Ask them for R32 GTR ones as they are the same... ------------- ND620R. |
Posted By: tom_dot_com
Date Posted: 29/November/2006 at 22:25
|
are any injectors a straight fit?
what about these 600cc nismo ones?
http://www.nengun.com/engine/nismo/high-performance-injector - http://www.nengun.com/engine/nismo/high-performance-injector
would I just need orings to fit these? ------------- £3200 Third Party insurance Worth Every penny |
Posted By: r called jay
Date Posted: 30/November/2006 at 19:13
Originally posted by tom_dot_comare any injectors a straight fit? Evo 5 and upwards are a direct replacement and are 550 low impedence  ------------- USC @ Pod 8/05 1/4 12.3 @ 109. |
Posted By: tom_dot_com
Date Posted: 30/November/2006 at 22:09
|
how about sards? ------------- £3200 Third Party insurance Worth Every penny |